Bangladeshi welder fabricating a steel gate in ChattogramLIVE / WELDING FLOOR
Asian welding team checking a custom gate frameTEAM / FIT + CHECK
01Cut02Fit03Weld
Wasim Workshop / Chattogram

Steel Made to Fit the Opening.

We measure, detail, weld and prepare gates, grills, stair safety metalwork, railings and canopies for real buildings.

Open the Cut List
Workshop principleMeasure twice. Tack first. Weld after the frame is square.
01Main GatesSwing and sliding
02Window GrillsMeasured protection
03Stair GatesSafer movement
04RailingsBalcony and stair
Fabrication Drawing

The Spark Comes After the Geometry.

A gate works because its opening, clearances, frame, hinges and locking points were understood before final welding.

01

Measure the Real Opening

Check width, height, level, fixing points and surrounding conditions.

02

Square the Fabrication

Cut, fit and tack the assembly before closing every weld.

03

Prepare for Installation

Review swing, clearance, hinge line and surface finish.

W / OPENING WIDTH
H / OPENING HEIGHT
FAB / 001Gate frame, hinge line and clear opening
Main gate welding and fabrication
CUT / 01

Main Gates

Sliding and swing gates fabricated around the entrance opening.

Window grill welding
CUT / 02

Window Grills

Protective patterns measured for windows and vents.

Stair gate and railing welding
CUT / 03

Stair Gates & Railings

Safety gates planned around steps, landings and movement.

Balcony railing welding
CUT / 04

Balcony Railings

Steel protection balancing spacing and building appearance.

Steel canopy fabrication
CUT / 05

Canopies & Frames

Steel frames for shades, roofs and practical structures.

Steel repair welding
CUT / 06

Repair Welding

Hinge, frame, joint and damaged metalwork repair.

Finished Metalwork

From Welding Table to Installed Detail.

The workshop result is complete only when the gate or railing belongs to its opening and works as intended.

Completed luxury steel entrance gate
Installed / main entrance

Geometric Gate with Presence

A strong boundary element refined around privacy, movement and architecture.

Completed staircase gate and railing
Installed / stair safety

Stair Gate and Railing as One

Matching metalwork creates safer movement and a consistent interior detail.

Before Fabrication

Bring Four Details to the Workshop.

Clear information helps the gate or grill begin with the right dimensions.

INFO / 01

Opening Size

Share width, height and any uneven or existing condition.

INFO / 02

Location & Use

Explain whether it is a main gate, stair, balcony or window.

INFO / 03

Preferred Pattern

Bring a reference image or describe privacy and spacing needs.

INFO / 04

Installation Condition

Share photos of posts, walls, hinges or fixing points.

Fabrication Route

Five Steps from Opening to Installation.

STEP 01

Measure

Read opening and fixing conditions.

STEP 02

Detail

Set pattern, sections and clearances.

STEP 03

Fabricate

Cut, fit, tack and weld.

STEP 04

Check

Review square, swing and finish.

STEP 05

Install

Fix and test in the real opening.

Workshop Enquiries

Send the Opening and Pattern.

Share photos, measurements, location, preferred metalwork and timing.

AddressChattogram, Bangladesh
Email Wasim Workshop